Running Pace Calculator
Work out pace and speed from a distance and a time, then turn a target pace into a finish time and a split table. Everything is calculated in this browser only.
Type the number and choose the unit beside it. Example: 10 or 21.0975
One colon means minutes:seconds (24:30), two mean hours:minutes:seconds (1:45:29). 25m 30s works too.
Paces and times are rounded to the nearest second and speeds to two decimals.
Write a pace as minutes:seconds, such as 5:30, and a speed as a number, such as 12 or 7.5.
Paces and times are rounded to the nearest second and speeds to two decimals.
One colon means minutes:seconds (24:30), two mean hours:minutes:seconds (1:45:29). 25m 30s works too.
Write a pace as minutes:seconds, such as 5:30, and a speed as a number, such as 12 or 7.5.
Paces and times are rounded to the nearest second and speeds to two decimals.
Estimate for reference only — verify before relying on it. This tool only does distance, time and speed arithmetic and is not training or health advice.
How it works
- Find pace
- Enter the distance run and the time to see pace per kilometre and per mile and the speed in one go. Fill the distance with the 5K, 10K, half marathon, marathon or 1 mile buttons, or type your own.
- Finish time
- Enter a target pace (min/km, min/mile) or speed (km/h, mph) to get the time to cover the chosen distance. A half marathon at 5:00/km takes 1:45:29.
- Split table
- Give a target finish time or pace and get the split time and total time for every kilometre (or every mile) in a table. It assumes the same pace from start to finish.
- Convert units
- Enter any one of min/km, min/mile, km/h or mph and see the other three. Handy for moving between a treadmill display and an outdoor pace.
How the numbers are worked out
- Distances become whole millimetres and times whole milliseconds, everything is calculated as exact fractions, and rounding happens only at the end. No floating point error builds up, so the same input gives the same result on any device.
- One mile is 1609.344 m. That is the definition of the international mile, and the same value is listed in the NIST unit conversion guide (SP 811). The marathon is 42.195 km and the half marathon is half of that, 21.0975 km.
- Paces and finish times are rounded to the nearest second and speeds to two decimals, with an exact half rounded up. Each split is the difference of two total times, so the splits always add up to the finish time.
- Limits: distance 1000 km, time 1000 hours, pace up to 100:00, speed from 0.6 to 200, split table 200 rows. These limits are an assumption this tool made, not a standard. Beyond them a typo is more likely than a real value, so the tool says so instead of calculating.
- The split table assumes one steady speed from start to finish. Hills, wind and stops at aid stations are not modelled.
Pace conversion table
Calculated with the same formulas as the tool. For each pace per kilometre it shows the pace per mile, the speed, and the finish time at the standard distances.
| min/km | min/mile | km/h | 5K | 10K | Half | Marathon |
|---|---|---|---|---|---|---|
| 3:30 | 5:38 | 17.14 | 17:30 | 35:00 | 1:13:50 | 2:27:41 |
| 3:45 | 6:02 | 16.00 | 18:45 | 37:30 | 1:19:07 | 2:38:14 |
| 4:00 | 6:26 | 15.00 | 20:00 | 40:00 | 1:24:23 | 2:48:47 |
| 4:15 | 6:50 | 14.12 | 21:15 | 42:30 | 1:29:40 | 2:59:20 |
| 4:30 | 7:15 | 13.33 | 22:30 | 45:00 | 1:34:56 | 3:09:53 |
| 4:45 | 7:39 | 12.63 | 23:45 | 47:30 | 1:40:13 | 3:20:26 |
| 5:00 | 8:03 | 12.00 | 25:00 | 50:00 | 1:45:29 | 3:30:59 |
| 5:15 | 8:27 | 11.43 | 26:15 | 52:30 | 1:50:46 | 3:41:31 |
| 5:30 | 8:51 | 10.91 | 27:30 | 55:00 | 1:56:02 | 3:52:04 |
| 5:45 | 9:15 | 10.43 | 28:45 | 57:30 | 2:01:19 | 4:02:37 |
| 6:00 | 9:39 | 10.00 | 30:00 | 1:00:00 | 2:06:35 | 4:13:10 |
| 6:15 | 10:04 | 9.60 | 31:15 | 1:02:30 | 2:11:52 | 4:23:43 |
| 6:30 | 10:28 | 9.23 | 32:30 | 1:05:00 | 2:17:08 | 4:34:16 |
| 6:45 | 10:52 | 8.89 | 33:45 | 1:07:30 | 2:22:24 | 4:44:49 |
| 7:00 | 11:16 | 8.57 | 35:00 | 1:10:00 | 2:27:41 | 4:55:22 |
| 7:15 | 11:40 | 8.28 | 36:15 | 1:12:30 | 2:32:57 | 5:05:55 |
| 7:30 | 12:04 | 8.00 | 37:30 | 1:15:00 | 2:38:14 | 5:16:28 |
| 7:45 | 12:28 | 7.74 | 38:45 | 1:17:30 | 2:43:30 | 5:27:01 |
| 8:00 | 12:52 | 7.50 | 40:00 | 1:20:00 | 2:48:47 | 5:37:34 |
| 8:15 | 13:17 | 7.27 | 41:15 | 1:22:30 | 2:54:03 | 5:48:07 |
| 8:30 | 13:41 | 7.06 | 42:30 | 1:25:00 | 2:59:20 | 5:58:39 |
Standard distances
| Event | km | miles | m |
|---|---|---|---|
| 5K | 5 | 3.1069 | 5000 |
| 10K | 10 | 6.2137 | 10000 |
| Half marathon | 21.0975 | 13.1094 | 21097.5 |
| Marathon | 42.195 | 26.2188 | 42195 |
| 1 mile | 1.6093 | 1 | 1609.344 |
The miles column is rounded to four decimals. Calculations use the exact distance in millimetres, not the rounded figure.
Worked examples
- 10 km in 50:00 is a pace of 5:00/km, 8:03 per mile, and a speed of 12.00 km/h.
- A marathon (42.195 km) in 3:30:00 averages 4:59/km (8:01 per mile) at 12.06 km/h.
- A half marathon (21.0975 km) at 5:00/km takes 1:45:29.
- 10 km at 8:00 per mile takes 49:43.
- A treadmill speed of 12 km/h equals 5:00/km, and 10 mph equals 6:00 per mile (3:44/km).
More calculators at seewol.com
Frequently asked questions
- Which time formats can I type?
- One colon is read as minutes:seconds (24:30) and two as hours:minutes:seconds (1:45:29). You can also add units: 25m 30s, 1h 45m, 1.5h. Seconds may have up to three decimals (5:30.5). A bare number such as 25 is refused because it could be minutes or seconds.
- How are commas and dots read?
- A dot is always a decimal point. A comma is read as a decimal comma (10,5 is 10.5), except that a comma followed by exactly three digits, as in 1,000, could be a thousands separator or a decimal and is refused. Write 1000 or 1.000 instead.
- What is the exact half marathon distance?
- 21.0975 km, which is half of the 42.195 km marathon. The half marathon button inserts that value and the calculation is exact to the millimetre. Real race courses and watch (GPS) recordings can differ slightly because of measurement error.
- Pace times distance is a few seconds off my time. Why?
- The pace is shown rounded to a whole second. For a 3:30:00 marathon the exact pace is 298.6 seconds, shown as 4:59, and 4:59 times 42.195 gives 3:30:16. To start from a target time, build the split table with the finish time format.
- How do I change a kilometre pace to a mile pace?
- A mile is 1609.344 m, so the pace per mile is the pace per kilometre times 1.609344. 5:00/km is 8:03 per mile. Enter either one in the unit converter and the other appears.
- How do I turn a treadmill speed into a pace?
- In the converter pick km/h or mph and type the number on the display to get min/km and min/mile. Treadmills differ in the unit they show, so check the screen. Incline is not modelled.
- Can I use the result for training or health decisions?
- The tool only does arithmetic on distance, time and speed. It gives no judgement or advice about training load, goals or health. Talk to a coach or a medical professional for those decisions.
- Is what I type stored?
- What you type is not sent to a server; it is calculated in this browser only. Reloading the page clears the fields.